How correctly recharge the Seac Wirless Transmitter.

> Plug the USB cable of your Seac Guru to a wall charger.
(e.g. the wall charger of your smartphone or tablet).



ATTENTION! Most PC and Mac with an advanced power management could stop the electric supply of the USB ports after a while.

Use wall chargers only to recharge your Seac Wirless Transmitter.


> Be sure to use the USB cable provided with your Seac Guru to recharge the Wireless Transmitter. All the USB cables compatible with the Wireless Transmitter have a blue dot on the connector.





> Check that the o-ring of the USB cable is on its place (see picture)
(The Seac Wireless Transmitter will not be able to recharge properly if the o-ring is missing).






> Plug the USB cable to the Seac Wireless Transmitter.

Plug the cable connector, make sure that the small protuberance on the cable head (blue) is placed as shown in the first picture below.

Gently turn the cable head as shown in the second picture below.








> The Seac Wireless Transmitter will blink in blue color.
The recharge is completed when the blue light turns off.



> Even if the Seac Wireless Transmitter has Li-Ion batteries without memory effect, we suggest to
recharge the Seac Wireless Transmitter at least for 5 hours.



> Unplug the USB cable.